Read Before Installing or Updating HP-UX 11i v2, December 2005

31
Determine if HP Servicecontrol Manager is installed on your
system by typing the following commands:
swlist -l bundle B8337BA B8339BA B8338BA
swlist -l product ServControlMgr AgentConfig \
SysMgmtServer SysMgmtAgent
Uninstall HP Servicecontrol Manager using the following
command: swremove ID
where ID is the product or bundle ID. For example:
swremove -x enforce_dependencies=false B8339BA
or
swremove -x enforce_dependencies=false \
SysMgmtServer SysMgmtAgent
Remove the old product subdirectories by executing the
following command: rm -fr /opt/mx /etc/opt/mx
• If Servicecontrol Manager is not configured or if HP SIM 4.x
is installed, and you want to continue to use HP SIM, you
must select HP SIM 5.0 for upgrade. Do this by using the -x
match_target=true option or by using the interactive
mode to select HPSIM-HP-UX.
You can also specify HPSIM-HP-UX on the command line. The
HP SIM 5.0 installer will upgrade both a configured and an
un-configured HP SIM 4.X.