Read Before Installing and Updating HP-UX 11i v2, May 2005

24
Memory Discrepancy with parstatus Command
When using the parstatus command on PA-RISC platforms,
the amount of memory allocated for CLM may not match the
amount of CLM requested due to some memory being reserved
exclusively for firmware as shown in the following example:
parstatus -Vp0
[Partition]
Partition Number : 0
Partition Name : Partition 0
Status : Active
IP Address :
Primary Boot Path : 12/0/3/0/0/4/1.12.0
Alternate Boot Path : 0/0/1/0/0.5.0
HA Alternate Boot Path : 0/0/1/0/0.6.0
PDC Revision : 36.8
IODCH Version : 5e70
Cell Architecture : PA-RISC
CPU Compatibility : 24176-PA
CPU Speed : 750 MHz
Core Cell : cab0,cell0
Total Good Memory Size : 64.0 GB
Total Interleave Memory: 32.1 GB
Total Requested CLM : 32.0 GB
Total Allocated CLM : 31.9 GB
...
What To Do
You can safely ignore the parstatus command output.