Interface Card OL* Support Guide

Chapter 4
olrad - Command Line Interface
Using olrad
77
The CRA severity levels and their meanings.
CRA_SUCCESS no affected resources in use.
CRA_WARNINGS resources in use on affected device(s) but none are deemed critical.
CRA_DATA_CRITICAL probable data loss, only proceed with the user's permission.
CRA_SYS_CRITICAL likely to bring down the user's system.
CRA_ERROR some internal CRA error encountered.
The syntax for this option is olrad -C
slot_id
.
Example 4-2 CRA Reporting Success.
# olrad -C 0-0-3-2
-------------------------------------------------------------------------------
CRITICAL RESOURCE ANALYSIS REPORT for Slot: 0-0-3-2
-------------------------------------------------------------------------------
Overall Result: SUCCESS
Reason: no affected devices
Date: Thu May 29 11:35:39 2003
Hardware Paths Analyzed:
None
Example 4-3 CRA Reporting a Data Critical Message
# olrad -C 0-0-3-0
-------------------------------------------------------------------------------
CRITICAL RESOURCE ANALYSIS REPORT for Slot: 0-0-3-0
-------------------------------------------------------------------------------
Overall Result: DATA CRITICAL resources will be affected
Reason: resources associated with possible data loss
Date: Thu May 29 11:30:26 2003
Hardware Paths Analyzed:
4/0/0/0/0 - PCI Serial (103c1048)
4/0/0/1/0 - HP PCI 10/100Base-TX Core
SYSTEM CRITICAL RESULTS -------------------------------------------------------
FILE SYSTEM ANALYSIS
Result: no system critical file systems will be affected
SWAP ANALYSIS
Result: no swap will be affected
DATA CRITICAL RESULTS ---------------------------------------------------------
FILE SYSTEM ANALYSIS
Result: no data critical file systems will be affected
NETWORKING ANALYSIS