HP-UX HB v13.00 Ch-13 - LVM

HP-UX Handbook – Rev 13.00 Page 68 (of 110)
Chapter 13 LVM
October 29, 2013
Main Menu: Enter command or menu >
3. If you know the path to your tape device, enter the following:
boot 0/0/1/0.1
4. If you don’t know the path to your tape device, you have to search for all bootable
paths (with the SEA command).
Searching for potential boot devices.
To discontinue search, press any key (termination may not be immediate).
Path# Device Path (dec) Device Path (mnem) Device Type
----- ----------------- ------------------ -----------
P0 0/0/0/0 lan.15.140.10.113 LAN Module
P1 0/0/1/0.6 extscsi.6 Random access media
P2 0/0/1/0.3 extscsi.3 Sequential access media
P3 0/0/1/0.1 extscsi.1 Random access media
P4 0/0/1/1.0 intscsib.0 Random access media
P5 0/0/2/0.0 intscsia.0 Random access media
5. Now you have the path and can boot with the command from step 3.
Die Frage Interact with IPL (Y, N, or Cancel)?> sollten Sie mit NEIN beantworten.
Booting...
Boot IO Dependent Code (IODC) revision 1
HARD Booted.
ISL Revision A.00.43 Apr 12, 2000
ISL booting hpux (;0):INSTALL
Boot
: disk(0/0/1/0.1.0.0.0.0.0;0):WINSTALL
8941568 + 1642496 + 2596176 start 0x1fef68
6. In order to interrupt the non-interactive installation, pres any key
WARNING: The configuration information calls for a non-interactive
Installation.
Press <Return> within 10 seconds to cancel batch-mode installation:
Really cancel non-interactive install and start the
User-interface? ([y]/n): y
7. After some minutes and some status screens you will see a similar a screen:
Welcome to the HP-UX installation/recovery process!
Use the <tab> key to navigate between fields, and the arrow keys
within fields. Use the <return/enter> key to select an item.