HP-UX 11i Version 2 May 2005 Release Notes

Workstation- and Server-Specific Information
Supported Systems
Chapter 4
90
Unsupported Servers and Workstations
• HP-UX 11i v2 is not supported on the following Itanium-1 based systems:
— rx4610
— rx9610
— i2000
• HP-UX 11i v2 is not supported on the following PA-RISC Servers:
— All 32-bit servers (including 32-bit A-Class servers A180 and A180C)
— All D-Class servers
— All R-Class servers
— All E-Class servers
— All K-Class servers
— All T-Class servers
— All V-Class servers
• HP-UX 11i v2 is not supported on PA-RISC Workstations. HP recommends that
PA-RISC Workstation customers use HP-UX 11i v1.
PA-RISC Workstations include the following:
— B132L, B132L+, B160L, B180L
— B1000, B2000, B2600
— C100, C110, C160L, C160, C180, C200, C240, C360
— C3000, C3600, C3650, C3700, C3750, C8000
— J200, J210, J210XC, J280, J282, J2240
— J5000, J5600, J7000, J6000, J6700, J6750
— 705, 710, 712, 715/33, 715/50, 715/75, 715/64, 715/80, 715/100, 715/100XC
— 720, 730, 735, 750, 755, 725/50, 725/75, 725/100
Finding Firmware Information
Firmware changes frequently. Make sure your system has the latest firmware installed
to support, for example, the latest versions of I/O adapters, mass storage devices, and
devices used when you install from media or a network depot.
• For a matrix of system firmware for PCI I/O adapters and HP-UX 11i boot support,
as well as the minimum firmware requirements for HP-UX 11i v2, refer to the
documents at http://docs.hp.com/en/hw.html#System%20Firmware.
• For the latest HP-UX 11i firmware updates, go to the IT Resource Center (ITRC)
Web site at http://itrc.hp.com.
Log in to your appropriate region. Click maintenance and support (for hp
products), then find individual patches and firmware.