HP-UX 11i Version 2 June 2007 Release Notes
Hardware-Specific Information
Always-Installed Mass Storage Drivers
Chapter 4
99
• The example program /opt/snia/demos/snia_demo.c now correctly displays the
port information for dual port FC HBAs.
• The Fabric WWN for an FC card gets cleared and shows up as
00:00:00:00:00:00:00:00 when fabric connection is removed and the card is connected
to a storage device in private loop topology.
•The makefile /opt/snia/demos/makefile.demo now support PA-RISC build.
• Extraneous characters have been removed in the configuration file /etc/hba.conf
to ensure that Base-VXVM does not log error in /etc/rc.log. The above
changes/defects fixes are already available in HP-UX 11i v3.
Compatibility
There are no known compatibility issues.
Performance
There are no known performance issues.
Documentation
Complete Fibre Channel documentation is available on http://www.docs.hp.com
(navigate to I/O Cards and Networking Software, then to Fibre Channel) or
directly at http://www.docs.hp.com/hpux/netcom/index.html#Fibre%20Channel:
• Support Guide: The HP Fibre Channel Support Guide includes an adapter overview,
installation details, adapter configuration, troubleshooting and maintenance
information, additional features, and regulatory information.
• Installation Guide: Software and hardware installation information for specific
HBAs.
• Support Matrix: The Support Matrix includes a matrix of Fibre Channel adapters,
supported hardware platforms, Operating Systems, Driver Bundle Versions, and
minimum PDC/Firmware requirements.
• White Paper: White Papers can also be found in this section.
Obsolescence
Not applicable.
FibrChanl-01 (Fibre Channel Mass Storage Driver for HP-UX 11i
v2)
FibrChanl-01 is the software bundle employed by Fibre Channel adapter cards using
the fcd driver.
Summary of Change
FibrChanl-01 has been updated to incorporate defect fixes. For details, see the
FibrChanl-01 (fcd) Fibre Channel Mass Storage Driver Release Notes (11.23) (MPN
J6374-90053), available at http://docs.hp.com/en/netcom.html#Fibre%20Channel.