HP-UX 11i Version 2 June 2007 Release Notes
Hardware-Specific Information
Always-Installed Mass Storage Drivers
Chapter 4
97
Summary of Change
The HP-UX 11i v2 release of June 2007 updates the 10GigEther-00 bundle to enable
future products.
Impact
The 10GigEther-00 bundle supports the AB287A 10 Gigabit Ethernet network card.
Compatibility
There are no known compatibility issues.
Performance
There are no known performance issues.
Documentation
For related 10 Gigabit Ethernet documents on the HP's Web site, please see
http://docs.hp.com; look under I/O Cards and Networking Software and then
under 10 Gigabit Ethernet.
To see what is changed from one release to the next, see the 10GigEther-00 driver’s
release history. It is located on http://docs.hp.com under I/O Cards and
Networking Software and then under 10 Gigabit Ethernet.
For the list of supported systems, please see the HP-UX Ethernet Driver Support Matrix
located on http://docs.hp.com under I/O Cards and Networking Software and
then under 10 Gigabit Ethernet.
Obsolescence
Not applicable.
Always-Installed Mass Storage Drivers
This release includes changes to the following always-installed mass storage drivers.
“Always-installed” means that the drivers are automatically installed during HP-UX
installation.
NOTE The HWEnable11i bundle, which is normally installed by default on the 11i OE media,
provides the patches that are required for the installation of these mass storage bundles.
When updating an existing 11i system, one can install the HWEnable11i bundle and the
desired mass storage bundle from the OE media in the same install session to meet
software dependencies.
In addition to currently supported cards, the swlist report may contain the product
numbers of cards that have been “pre-enabled,” but have not been released yet.