HP-UX 11i Version 2 June 2007 Release Notes

Hardware-Specific Information
Finding Firmware Information
Chapter 4
106
— HP Superdome server (32 sockets) with sx2000 chipset
— HP Superdome server (64 sockets) with sx2000 chipset
• HP Integrity servers with new mixed PCI-X and PCI-express I/O backplane
— HP Integrity rx2660 server (2 single-core processors) with zx2 chipset
— HP Integrity rx3600 server (2 dual-core processors) with zx2 chipset
— HP Integrity rx6600 server (4 dual-core processors) with zx2 chipset
Finding Firmware Information
Firmware changes frequently. Make sure your system has the latest firmware installed
to support, for example, the latest versions of I/O adapters, mass storage devices, and
devices used when you install from media or a network depot.
• For a matrix of system firmware for PCI I/O adapters and HP-UX 11i boot support,
as well as the minimum firmware requirements for HP-UX 11i v2, refer to the
documents at http://docs.hp.com/en/hw.html#System%20Firmware
• For the latest HP-UX 11i firmware updates, go to the IT Resource Center (ITRC)
Web site at http://itrc.hp.com.
Log in to your appropriate region. Click maintenance and support for hp
products, then patch/firmware database.
If you have to patch your firmware, the ITRC provides a patch database to search, as
well as patch documentation that provides information on how to patch the
firmware.
• HP also provides the Subscriber’s Choice, which enables you to sign up to receive
email notices for firmware updates. At the ITRC Web site, click maintenance and
support for hp products, then support information digests.
Utility Pricing Solutions
The HP Instant Capacity (iCAP) and HP Pay per use (PPU) software products are a part
of the HP Utility Pricing Solutions program. iCAP is a purchase model in which capacity
can be instantly increased to accommodate increasing demands. PPU is a lease model in
which customers are charged only for actual processor usage.
PPU is unchanged for the June 2007 update release.