HP-UX 11i Version 2 June 2007 Release Notes

Hardware-Specific Information
Default-Installed Mass Storage Drivers
Chapter 4
103
Documentation
For further information about the USB product, see the USB READMEs in
/var/adm/sw/products.
Obsolescence
Not applicable.
Default-Installed Mass Storage Drivers
This release includes changes to the following default-installed mass storage driver.
“Default-installed” means the driver is installed by default during HP-UX installation.
You can manually de-select the driver before you install or update system.
For the most current information on supported I/O cards, see the set of Support Matrixes
available on the I/O Cards and Networking Software Web page at
http://www.docs.hp.com/en/netcom.html. At the top of the page, click the link for the
card technology you are interested in, then scroll down to the Support Matrixes
heading. If a support matrix for your card technology is unavailable, check the card’s
user guide or release notes.
FibrChanl-02 (Fibre Channel Mass Storage Driver for HP-UX 11i
v2)
FibrChanl-02 is the new driver bundle (driver is named fclp), which will be supporting
new PCI Express (PCIe) fibre channel host bus adapter cards. The first of these new
cards will be the AD299A, which is being introduced in the June 2007 release.
IMPORTANT Install all driver software and dependent patches before you install the adapter. For
more information, see FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX
11i v2 Release Notes available at
http://docs.hp.com/en/netcom.html#Fibre%20Channel
Information about supported cards can be found in the support matrixes available at
http://docs.hp.com/en/netcom.html#Fibre%20Channel
Summary of Change
FibrChanl-02 is being introduced in the June 2007 release to support a new set of PCIe
fibre channel host bus adapters, starting with the AD299A. The driver name is fclp,
which is default-installed.
Since this is a new product, there are no defect changes for this release.