HP-UX 11i Version 2 Installation and Update Guide, May 2005

System Requirements for Cold-Installing and Updating
Supported Servers and Workstations
Chapter 236
Supported Servers and Workstations
This HP-UX 11i v2 (B.11.23) release supports only a 64-bit version of the
HP-UX kernel. It fully supports the following HP Integrity Servers, HP
Workstations, and HP 9000 Servers:
PA-RISC Systems
• HP 9000 rp84x0 and rp74x0 series
• HP 9000 rp54x0 and rp44x0 series
• HP 9000 rp34x0 and rp24x0 series
• HP 9000 Superdome server
• 64-bit A-Class, L-Class, and N-Class servers
Itanium-based Systems
• HP Integrity cx2600 server
• HP Integrity rx16x0 server
• HP Integrity rx26x0 server
• HP Integrity rx4640 server
• HP Integrity rx5670 server
• HP Integrity rx7620/rx8620 server
• HP Integrity Superdome server
• HP zx2000 workstation (See note below.)
• HP zx6000 workstation (See note below.)
NOTE The HP zx2000 and zx6000 workstations will no longer be supported on
HP-UX 11i v2 after the May 2005 release.
For additional information about these servers and workstations go to
the Enterprise Servers, Workstations, and Systems Hardware Web site:
http://docs.hp.com/hpux/hw