HP-UX 11i Version 2 Installation and Update Guide, May 2005

Known Problems and Troubleshooting
Known Install and Update Problems
Appendix B152
Known Install and Update Problems
Table B-1 describes problems known to occur in the HP-UX 11i v2
release.
Table B-1 Known Install and Update Problems
Problem Description/Action
Deferred Fileset
Installation on
Itanium-based Systems
Updating from Earlier
HP-UX 11i v2 (B.11.23)
Releases
When HP-UX 11i v2 September 2004 is being installed as an
update to an existing HP-UX 11i v2 (B.11.23) Itanium-based
server, the PHKL_31500.CORE-KRN will be excluded. This
omission will pose no risk to the system or create installation
errors or warnings.
What To Do
There is no need to address this issue, as the fileset should be
added as a part of future patch installs. If you choose, you can
explicitly add the excluded fileset using the command:
swinstall -s yourdepotname -x \
autoreboot=true PHKL_31500.CORE-KRN
Installation of this fileset will result in a system reboot. In the
swagent.log file, you will see something similar to the
following message:
NOTE: The patch fileset
"PHKL_31500.CORE-KRN,r=1.0" cannot be installed
because its base fileset
"OS-Core.CORE-KRN,l=/,r=B.11.23" is being updated
in this session. Patch fileset
"PHKL_31500.CORE-KRN,r=1.0" will be excluded.