HP-UX 11i Version 2 Installation and Update Guide, March 2004

Known Problems and Troubleshooting
Known Problems Discovered In This Release
Appendix B160
UpdateHangTimeout:
UpdateHangTimeout: 120000
NOTE The system may still appear to be hung during reboot for at least 20
minutes if the load is high.
PHSS_29710 Non-Critical Patch Warning
A Non-Critical Patch Warning has been issued for PHSS_29710:
PHSS_29710 - s700_800 11.23 Xserver cumulative patch
The following information has been added to the patch documentation
for PHSS_29710:
Warn: 04/01/30 - This Non-Critical Warning has been issued by HP.
- PHSS_29710 does not completely install all of the dynamically
loadable kernel modules (DLKMs) included in the patch.
As a result, systems with ATI Fire GL X1 and Fire GL Z1
video systems will lose Xserver overlay visuals and will not
be able to run OpenGL applications.
- The following steps may be used to resolve this issue.
Note that the workaround does NOT require a reboot and need
only be done once per system:
- Log off from the graphics console
- Login as root with the console login option or a
remote login
- Execute the following commands:
/sbin/init.d/dtlogin.rc stop
/sbin/init.d/xf86 stop
/usr/sbin/kcmodule -s drmfgl=unused
/usr/sbin/kcmodule -s drmfglrx=unused
/usr/sbin/kcmodule -s gvid_him_cons=unused
/usr/sbin/kcmodule -s gvid_him_fgl=unused
/usr/sbin/kcmodule -s gvid_him_rad=unused
/sbin/init.d/xf86 start
/sbin/init.d/dtlogin.rc start
- This behavior will be corrected in PHSS_30171, which is
expected to be released in February 2004.