HP-UX 11i Version 2 December 2007 Release Notes

Performance
There are no known performance issues.
Documentation
The “bundle readme” document can be found on the OE media under the /DOCS/PATCH directory,
or on the IT Resource Center website at http://itrc.hp.com.
For further information, refer to the following websites:
• http://itrc.hp.com
• http://hp.com/go/softwaredepot
Also refer to the latest documents, available at http://www.docs.hp.com/hpux/os/11iV2:
• HP-UX 11i v2 Installation and Update Guide
• Read Before Installing or Updating to HP-UX 11i v2
• Patch Management User Guide for HP-UX 11.x
Obsolescence
Not applicable.
HP Instant Support Enterprise Edition
Hewlett-Packard Instant Support Enterprise Edition (ISEE) is a secure remote support platform
for business servers and storage devices. The HP ISEE client software is installed on each
supported device covered by an HP Support Agreement. ISEE Monitored Clients communicate
directly with the HP Support Center through the firewall and/or Web proxy server to deliver
hardware incident information to the HP support center for reactive support. Additionally,
system information is collected and can be used for proactive support.
Summary of Change
This new version (A.03.95.510.46.03) of ISEE Client has defect fixes.
Impact
There is no impact.
Compatibility
Before enabling or configuring Instant Support Enterprise Edition, verify that you have collected
the necessary information and met all of the requirements outlined in Chapter One and Appendix
A of the HP Instant Support Enterprise Edition Client Installation and Upgrade Guide. Please note
that HP Instant Support Enterprise Edition is only supported on servers, not HP-UX workstations.
Enabling ISEE ISEE is installed in a disabled state. To enable the client complete the following
steps:
1. In the file /etc/rc.config.d/hpservices.conf change the value of START_TUNER
from 0 to 1.
2. In the file /etc/rc.config.d/rstemsListener change the value of RST_LISTENER
from 0 to 1.
3. Execute /sbin/init.d/hpservices start
4. 4. Execute /sbin/init.d/rstemsListener start
5. Execute /sbin/init.d/runner start
Configuring ISEE The ISEE configuration process is documented in the section titled
“Configuring ISEE after an Individual Installation” in the HP Instant Support Enterprise Edition
HP Instant Support Enterprise Edition 91