HP-UX 11i v2 Read Before Installing or Updating, September 2006

If no monitors are returned by the ps command then the
problem exists and you must remap your hardware and
restart the CIM server as described below.
If monitors are returned from the ps command, enter
cstm at the cstm command prompt and then enter map. If
the output of the map command displays "Unknown" for all
devices other than for the System device and the Memory
device, then the problem exists and you must remap your
hardware and restart the CIM server as described below.
What To Do
Remap your hardware and restart the CIM server. To
remap your hardware, complete the following steps:
1. Log in as superuser.
2. Enter the following command at the HP-UX prompt:
# /usr/sbin/cstm
3. Enter the following command at the cstm prompt:
cstm>remap
A message is displayed indicating that the map will be
refreshed when the rescan of the hardware is completed.