HP-UX 11i v2 Installation and Update Guide, September 2006

Installing HP Applications and Patches
Installing HP-UX Applications
Chapter 7132
Step 4. Use swinstall to install software from the Applications DVD.
The following example uses swinstall to install software from the
source mounted at /dvdrom:
swinstall -i -s /dvdrom
Refer to the swinstall (1M) manpage for details. The swinstall program
presents an interface for selecting and installing software from the DVD.
Step 5. Unmount and eject the Applications DVD.
You must unmount the DVD before you can eject it from the DVD drive.
The DVD is automatically unmounted whenever the server reboots.
Use the umount command to unmount the DVD. For example,
umount /dvdrom unmounts the /dvdrom file system. Refer to the
umount (1M) manpage for details.
NOTE After you install or update HP-UX 11i v2, the latest critical patches that
shipped with the media are installed on your system. Other
recommended critical or required patches may have become available
after the initial release of the media. On a regular basis go to the HP IT
Resource Center for any new, recommended critical patches:
http://itrc.hp.com