HP-UX 11i v2 Installation and Update Guide, September 2006

Cold-Installing HP-UX 11i v2
Cold-installing HP-UX 11i v2
Chapter 5100
Step 12. On the
System Summary screen, use the Show Summary button to view a
summary of how your system will be configured. If you see any problems,
or want to change any of your selections, back up to the appropriate step,
and make the needed changes; otherwise select
Finish (at the bottom of
the screen).
You can Cancel at this time. If you cancel, you can start again .
Task 4: Deselecting OE Software Bundles
If you use the Guided Installation or Advanced Installations, then
you can deselect the software bundles that are installed by default. For a
list of default-installed software bundles, see “Default-Installed
Software” on page 174.
If you choose the No User Interface option, then you cannot deselect
the default-installed software bundles.
To deselect the software bundles:
Step 1. In the Guided Installation or Advanced Installation windows,
select the Software tab.
Step 2. Use the arrow keys to select a bundle and the spacebar to change the
option.
IMPORTANT Deselecting software that HP recommends carries some risk. For
example, you may deselect a software bundle that is necessary for
another program to work correctly. If in doubt, leave the selections as
default.