HP-UX 11i v2 Installation and Update Guide, March 2006
Cold-Installing HP-UX 11i v2
Cold-installing HP-UX 11i v2
Chapter 598
NOTE If you select VxVM, the root disk cannot be moved to another SCSI bus or
address that results in a change in the hardware path to the device. If it
is moved, you may not be able to boot safely from it. This is similar to the
limitation present in LVM.
Step 6. On the
Root Group screen, specify how many disks you want placed into
the root volume group. If you have more than one disk, you may select
Yes to choose the Striping option.
Step 7. On the
Languages screen, browse the available languages, marking the
desired selections.
Step 8. On the
Additional Software screen, select any additional software that you
want loaded onto your system. Browse the list, marking your selections,
then continue to the next step.
For example, to secure your system at install time, do the following:
a. Select Security Choices.
The four security levels appear. By default, Sec00Tools is selected.
b. Select the appropriate security setting for your system based on the
information in the section called, “Security Considerations” on
page 54.
c. Select
OK.
For more information, see “Security Considerations” on page 54.
Step 9. On the
Pre-Install Disk Information screen (Step 1), identify which disks
will be overwritten during the install process. If you see a disk in the list
that you do not want included, back up to the root disk selection and
choose another disk. Otherwise, continue on to the next step.
Step 10. On the
Pre-Install Check Information screen (Step 2), review any errors,
warnings, or notes. Warnings are simply informational. If there are any
errors, they will need to be resolved before the installation can continue.
Step 11. On the
System Summary screen, use the Show Summary button to view a
summary of how your system will be configured. If you see any problems,
or want to change any of your selections, back up to the appropriate step,
and make the needed changes; otherwise select
Finish (at the bottom of
the screen).
You can
Cancel
at this time. If you cancel, you can start again
.