HP-UX 11i v2 Installation and Update Guide, December 2007

Cold-Installing HP-UX 11i v2 Using Media
Cold-installing HP-UX 11i v2 from Media
Chapter 5 91
Network Data Collection Table
Table 5-2 provides HP-UX commands that you can use after the install to
confirm specific information.
Table 5-2 Network Data
Type of Data Your Specific Data
HP-UX Command to Confirm Data
After System is Up and Running
Host Name uname -n
Host IP Address
nslookup
name
Subnet Mask grep SUBNET_MASK
/etc/rc.config.d/netconf
Default Gateway IP Address grep ROUTE_GATEWAY
/etc/rc.config.d/netconf
Domain Name cat /etc/resolv.conf
DNS IP Address cat /etc/resolv.conf
NIS Domain Name grep NIS_DOMAIN
/etc/rc.config.d/namesvrs