HP-UX 11i v2 Installation and Update Guide, December 2007

Choosing an Installation Method
Security Considerations
Chapter 356
Selecting Your Security Levels at Install Time
During installation, you can configure your security levels by navigating
to either the
System tab or the Software tab from the Client Installation
Configuration Interface. The System tab allows you to configure
information unique to your system such as security levels, hostname, IP
address, root password, and the time zone.
HP recommends using the
System tab to select the security level
appropriate for your deployment as described below.
1. If you are using the Ignite-UX GUI, navigate to the System tab
(from the Client Installation Configuration Interface) and select
Security Choices
The four security levels appear. By default, Sec00Tools is selected.
2. Select the security level appropriate for your deployment. See
“Predefined Security Levels” on page 55 for more information.
3. Select
OK.