HP-UX 11i v2 Installation and Update Guide, December 2005

Cold-Installing HP-UX 11i v2
Cold-installing HP-UX 11i v2
Chapter 590
Network Data Collection Table
Table 5-2 provides HP-UX commands that you can use after the install to
confirm specific information.
Root Disk Volume Group Disks (How many
disks you want placed into the root disk
volume group and whether or not you want
the disks to be striped or mirrored?)
Select additional software
(All, HP-UX Additions, Uncategorized)
Pre-Installed Disk Information
(Is overwritten during the install disk; see
Root Disk Path) This is a “review”
confirmation step.
Table 5-1 Miscellaneous Data (Continued)
Type of Data Your Specific Data
Table 5-2 Network Data
Type of Data Your Specific Data
HP-UX Command to Confirm
Data After System is Up and
Running
Host Name uname -n
Host IP Address
nslookup name
Subnet Mask grep SUBNET_MASK
/etc/rc.config.d/netconf
Default Gateway IP
Address
grep ROUTE_GATEWAY
/etc/rc.config.d/netconf
Domain Name cat /etc/resolv.conf
DNS IP Address cat /etc/resolv.conf
NIS Domain Name grep NIS_DOMAIN
/etc/rc.config.d/namesvrs