HP-UX 11i v2 Installation and Update Guide, December 2005

Choosing an Installation Method
Security Considerations
Chapter 356
Selecting Your Security Levels at Install Time
During installation, you can configure your security levels by navigating
to either the
System tab or the Software tab from the Ignite-UX Graphical
User Interface Installation and Configuration dialog box. The System
tab allows you to configure information unique to your system such as
security levels, hostname, IP address, root password, and the time zone.
HP recommends using the
System tab to select the security level
appropriate for your deployment as described below.
1. Do one of the following:
• If you are using the Ignite-UX UI, navigate to the System tab
(from the Ignite-UX Installation and Configuration dialog box)
and select Security Choices.
• If you are using the Ignite
Install HP-UX Wizard, navigate to the
Additional Software screen and select Security Choices.
The four security levels appear. By default, Sec00Tools is selected.
2. Select the security level appropriate for you deployment. See
“Predefined Security Levels” on page 55 for more information.
3. Select
OK.