HP Fibre Channel Fabric Migration Guide

Fabric Migration Guide
Migrating to Fabric
Chapter 18
— A6826A HP-UX 11i v1.0 software driver. The driver is available
on the web at http://www.software.hp.com.
— PHKL_28801 or later for HP_UX 11i v1.0
— PHKL_23445 or later for HP-UX 11i v1.0
• Supported hardware
For the latest list of supported hardware and topologies, contact your HP
representative, or visit the ITRC web site mentioned on page 6 in this
manual.
Restrictions
• All target loop devices are required to continue using hard physical
addresses.
• Remote device or LUN level scanning from IODC is not supported.
• fcmsutil option, echo, cannot be used in a fabric configuration.
• The maximum number of Tachyon TL hosts that HP recommends on
an FL_Port is nine in non-HA configurations and four in HA
configurations.