DUMPAAEnable Version B.11.23.0609 Release Notes

What Is New in This Version

------------ ---------- ---------- ------------ -------------------------

31:0x006000 314208 4194304 64:0x000002 /dev/vg00/lvol2

31:0x0a0100 0 2097148 /dev/dsk/c10t0d1

31:0x2a0400 0 2097148 /dev/dsk/c42t0d4

(/dev/dsk/c10t0d2)

31:0x0a0300 0 2097148 /dev/dsk/c10t0d3

----------

10485748

NOTE Here, the actual path /dev/dsk/c10t0d2 is displayed in parentheses directly

below the user configured path /dev/dsk/c42t0d4.

Time T4: All Paths to the A-A device (/dev/dsk/c42t0d4 and /dev/dsk/c10t0d2) fail.

Time T5: The Secure Path Active-Active monitor cycle (default, 10 minutes interval) is met.

The dump device is internally set as OFFLINE.

NOTE The dump will fail if a crash occurs between time intervals T4 and T5. A dump

performed after T5 will not include the OFFLINE devices.

Time T6: Display the actual paths to the dump device:

# crashconf -l

The crash dump configuration has been changed since boot. The following output is displayed:

CLASS PAGES INCLUDED IN DUMP DESCRIPTION

-------- ---------- ---------------- -------------------------------------

UNUSED 5988649 no, by default unused pages

USERPG 65445 no, by default user process pages

BCACHE 497424 no, by default buffer cache pages

KCODE 3572 no, by default kernel code pages

USTACK 883 yes, by default user process stacks

FSDATA 120 yes, by default file system metadata

KDDATA 167076 yes, by default kernel dynamic data