Using the HP DTC 16RX Manager

93
Copying and pasting all port configurations
12
Copying and pasting all port configurations
1 At the system prompt, type:
rdtcmodify first_dtcname
The DTC Rear Panel Configuration screen appears.
2 In the Board field enter B or b. Do not enter any value in the port field.
3 Press the Action Menu (F5) function key and then select Copy.
A confirmation message is displayed showing that the data was copied.
4 Press the space bar. You return to the Rear Panel Configuration screen.
5 To exit, press the Exit Task (F8) function key. You then leave the Rear Panel
Configuration screen and return to the system prompt.
6 At the system prompt, type:
rdtcmodify other_dtcname
The DTC Rear Panel Configuration screen appears.
7 In the Board field enter B or b. Do not enter any value in the port field.
8 Press the Action Menu (F5) function key and then select Paste.
A confirmation message is displayed showing that the data was pasted.
Press the space bar. You return to the Rear Panel Configuration screen.
9 To exit, press the Exit Task (F8) function key.
10 When you modify DTC parameters, at the end of the configuration process you
are prompted to activate your changes immediately. You can also choose to reset
the DTC later and activate your changes at a more convenient time for you.
11 If you want to copy the configuration of the first DTC to another DTC, repeat
from step 6.
rdtcmodify dtcname
or
rdtcadd dtcname dtc_IP_address
DTC backplane
Board = B, Port not chosen
Copy
Paste
Change
Port Group