Using the HP DTC 16RX Manager

87
Configuring port parameters
11
Default Destination (IP Address or Internet Services name)
Enter one of the following in this field.
• Empty—no system is identified.
• Internet Services node domain name—any number of non-empty fields
separated by periods (.). Each field may contain alphanumeric characters and
hyphens (-) but must start with an alphabetic character.
• IP address
This field specifies the default destination system for the device connected to the
port.
1. You can only use a system name here for Telnet system if a DNS server has been configured on the DTC
Other Port
Settings
Type of Port What to enter for
“Default Destination”
Result
Switching
disabled
Direct
Connect
terminal
IP address of system
or
system name
1
The DTC connects you to this system when
it senses a carriage return at the terminal.
Switching
enabled
Direct
Connect
terminal
empty
IP address of system
or
system name
1
You must type C followed by the IP
address or name of the system to which you
want to connect.
If you type C, without specifying a system,
you are connected to the default
destination.
Automatic
connection
enabled
Modem
terminal
IP address of system
or
system name
1
The DTC connects you to this system when
it detects modem activity.
Dedicated
printer
enabled
Printer IP address of system
or
system name
1
The printer is only available to the “default
destination” system.