Using the HP DTC 16RX Manager

81
Configuring port parameters
11
Configuring port parameters
Figures 16, 17 and 18 show examples of the Terminal Port Parameters, Printer
Port Parameters and Host Port Parameters screens.
1 Enter the field values, referring to the online help for guidance.
2 When you have finished entering values, press the Perform Task (F4) function
key. You return to the Rear Panel Configuration screen.
Figure 16. Direct Connect Terminal Configuration Screen
rdtcmodify dtcname
or
rdtcadd dtcname dtc_IP_address
DTC backplane
Board = B or b, Port = #
Configure
parameters
port
Enable
port
options
Save
as user
default
Copy
Paste
Change
port type