Using the HP DTC 16RX Manager

75
Configuring a port
11
You are taken to the appropriate screen to enter new port values. The screen and
the information you provide for each task varies depending on the type of port
group (direct-connect or modem) and type of port (printer, terminal or host) you
have chosen to configure.
5 Consult the online help for more information on individual fields.
The port configuration screen displays the current defaults being used. The
Configure Port screen and Enable Port Options screen allow you to choose
HP Defaults, User Defaults, or enter other values.
The screens are described in the rest of this chapter.
6 When you have finished making your changes, return to the Rear Panel
Configuration screen.
7 You can configure another port or exit from this Rear Panel Configuration
screen.
8 To exit, press the Exit Task (F8) function key.
When you modify DTC parameters, at the end of the configuration process you
are prompted to activate your changes immediately. You can also choose to
reset the DTC later and activate your changes at a more convenient time.
You then leave the Rear Panel Configuration screen and return to the system
prompt.
Note Changes you make to the port parameters described in this chapter can be activated
on the DTC without a disruptive reset. However, any terminal users connected to the
DTC and running sessions will not see the changes until they close the current
sessions and start new sessions.