Using the HP DTC 16RX Manager

62
Configuring SNMP/MIB data parameters
8
Configuring SNMP/MIB data parameters
The SNMP/MIB Data Configuration screen contains the SNMP-specific data to be
stored on the DTC. This data can only be configured on the DTC after a hardware
reset, but may be changed online by an authorized SNMP manager workstation after
initial download. See figure 9.
Figure 9. SNMP Parameters Screen
rdtcmodify dtcname
or
rdtcadd dtcname dtc_IP_address
DTC backplane
Board = L
Configure
parameters
IP & DNS
Configure
global
parameters
Configure SNMP
authorization
filters
Configure
SNMP data
parameters
Save
as user
default
Configure
AFPC
parameters
Configure
TCP
parameters