Using the HP DTC 16RX Manager

55
Saving a LAN board configuration as the user default
7
Saving a LAN board configuration as the user default
You can save the configuration of the LAN card as your default LAN card
configuration. Each time you add a new DTC to your configuration its LAN card is
automatically configured to be the same as the user default LAN card configuration.
The DTC IP address, DTC name and DTC node name are not saved as part of the
default LAN board configuration.
Use the Save as User Default option from the Action Menu at the Rear Panel
Configuration screen as follows:
1 Enter L or l in the Board field of the Rear Panel Configuration screen.
2 Press the Action Menu (F5) function key and select Save as User Default.
rdtcmodify dtcname
or
rdtcadd dtcname dtc_IP_address
DTC backplane
Board = L
Configure
parameters
IP & DNS
Configure
global
parameters
Configure SNMP
authorization
filters
Configure
SNMP data
parameters
Save
as user
default
Configure
AFPC
parameters
Configure
TCP
parameters