Using the HP DTC 16RX Manager

52
Configuring TCP parameters
7
1 Use the tab key to move to a Set field. Type an x or X to select the set. The timer
values are defined by the set of values that you choose.
• Set 1: TCP timers for traffic over the LAN only (the HP default setting).
• Set 2: TCP timers for traffic over a LAN with bridges.
• Set 3: TCP timers for traffic over a LAN with exceptionally high
transmission times.
• Set 4: TCP timers for networks with high data losses.
• Set 5: TCP timers for extended switching applications over a LAN, or a
LAN with bridges.
2 Press Done (F4) key to return to the Rear Panel Configuration screen.
3 You must perform a disruptive reset the DTC to modify the TCP timers. Press
the Exit Task function key to leave the DTC Manager menu-driven user
interface. You are asked several questions to confirm your configuration. To
activate your changes you can either:
• Type y to the question: Do you want to reset the DTC 16RX now?
or
• Type the following command later at the prompt:
rdtcreset dtcname