Using the HP DTC 16RX Manager

48
Configuring global parameters
7
Figure 5. Global Parameters Configuration Screen
1 Enter the field values, referring to the online help for guidance.
2 When you have finished entering values, press the Perform Task (F4) function
key. You return to the Rear Panel Configuration screen.
Global parameters
DTC User Interface
Timeout
Specify a timeout value between 5 and 300 seconds for the DTC. The default
timeout is 300 seconds. A user at a terminal using the connect command (see
page 153) to connect to a system via the DTC must attempt to connect to the system
within this amount of time.
The DTC waits this amount of time before the DTC Terminal User interface is
disconnected. Once the terminal has established a connection with a system via the
DTC, the timeout is disabled until the user returns to the DTC user interface.
The DTC User Interface Timeout can be enabled and disabled from the Enable Port
Options screen. Refer to “Enable DTC User Interface Timeout” on page 78 for an
explanation of the timeout enable function. By default, the DTC User Interface
Timeout is disabled.