Using the HP DTC 16RX Manager

47
Configuring global parameters
7
Enter the IP address of the DNS server to be used if the default DNS server is not
available.
Default Local Domain
Enter the default local domain that you want to use. The DTC uses the specified
local domain name to complete the domain node name when necessary. If a terminal
user enters a node name without a period, the DTC will complete the node name
with the default local domain name. For example, if the Default Local Domain is
hp.com and a terminal user enters:
DTC> connect host1
the DTC will try to connect to host1.hp.com.
Configuring global parameters
Figure 5 shows the Global Parameters Configuration screen.
The DTC user interface timeout, DTC user prompt, and the DTC welcome message
are used by the DTC terminal user interface which is explained in appendix B,
"DTC Terminal Parameters and Commands".
rdtcmodify dtcname
or
rdtcadd dtcname dtc_IP_address
DTC backplane
Board = L
Configure
parameters
IP & DNS
Configure
global
parameters
Configure SNMP
authorization
filters
Configure
SNMP data
parameters
Save
as user
default
Configure
AFPC
parameters
Configure
TCP
parameters