Using the HP DTC 16RX Manager

45
Configuring IP and DNS parameters
7
Figure 4. IP and DNS Parameters Configurations
1 Enter the field values, referring to the online help for guidance.
2 When you have finished entering values, press the Perform Task (F4) function
key. You return to the Rear Panel Configuration screen.
3 You must perform a disruptive reset of the DTC to modify the node name. Press
the Exit Task function key to leave the DTC Manager menu-driven user
interface. You are asked several questions to confirm your configuration. To
activate your changes you can either:
• Type y to the question: Do you want to reset the DTC 16RX now?
or
• Type the following command later at the prompt:
rdtcreset dtcname