Using the HP DTC 16RX Manager

43
Configuring the LAN board parameters
7
3 Press the Action Menu (F5) function key for a list of action options. See
figure 3.
Figure 3. DTC LAN Board Action Menu
Note If you change the IP address, you must make the same modification on the DTC (with
the DTC’s console).
4 To choose one of these menu items, which are explained in the following
sections, highlight it and press the Select Action (F4) function key.
5 A screen appears displaying the current values. In some screens, you can choose
HP defaults, user-defined defaults, or enter other values. Press the Default
Values (F6) function key to access the HP defaults or user-defined defaults.
6 When you have finished entering values, press the Perform Task (F4) function
key. The Rear Panel Configuration screen appears again.
7 Press the Action Menu (F5) if you want to choose another menu item.
8 To exit from the configuration screens, press the Exit Task (F8) function key.
When you modify DTC parameters, at the end of the configuration process you
are prompted to activate your changes immediately. You can also choose to reset
the DTC later and activate your changes at a more convenient time for you. You
then return to the system prompt.