Using the HP DTC 16RX Manager

Adding a DTC

1 Type:

rdtcadd <name_of_new_dtc> <DTC_IP_address> <name_of_dtc_to_copy>

DTC Manager displays the Rear Panel Conﬁguration screen for the newly

added DTC.

2 Use DTC Manager to modify the DTC’s configuration as described in chapter 6.

Note The following parameters must be unique for each DTC. They will not be copied to

the new DTC:

DTC IP address

DTC name

DTC node name

Note To find out if you need to reprogram the DTC, refer to “About DTC code versions”

above.

Examples

To add a DTC called claudia in the latest default DTC code version when the DTC

unit already runs the same code version:

rdtcadd claudia 15.128.25.122

To add a DTC called mydtc1 in the latest default DTC code version when the DTC

unit runs a different code version:

rdtcadd mydtc1 15.128.25.120

rdtcreprog mydtc1

To add a DTC called mydtc2 in the A1410G00 DTC code version when the DTC

unit already runs this version:

rdtcadd mydtc2 15.128.25.125 -v A1410G00

To add a DTC called newdtc by copying the conﬁguration parameters and the DTC

code version of an existing DTC called olddtc.

rdtcadd newdtc 15.128.23.78 olddtc

DTC parameters

The following parameters are conﬁgured when you add a DTC. They must be

unique for each DTC in your network.