Using the HP DTC 16RX Manager

154
DTC user interface commands
B
Each connection is identified as a number (xx) in the status command display.
Only the connection number can be used. The connection name can not be used. If
the connection number is not specified, the current system connection is recalled.
Set ASCII Set ASCII sets the data transfer mode to ASCII.
[SET ]A[SCII] [ xx ]
Each connection is identified as a number (xx) in the status command display.
Only the connection number can be used. The connection name can not be used. If
the connection number is not specified, the current system connection is set.
Set binary Set Binary sets the data transfer mode to binary.
[SET ]B[INARY] [ xx ]
Each connection is identified as a number (xx) in the status command display.
Only the connection number can be used. The connection name can not be used. If
the connection number is not specified, the current system connection is set.
Status Status displays a table showing information about the open connections from the
terminal. The connection number is displayed by status.
S[TATUS]
Examples of DTC user interface commands
The following examples show the DTC Terminal User help, status, and connect
commands you can enter. User input is bold type. The DTC prompt on the DTC in
the examples is DTC1>>.
Examples of the connect command
DTC1>CONNECT ALPHA <return>
DTC1>C rainbow connection3<return>
DTC1> connect mysystem
Connection #1 established to MYSYSTEM.MKTG.COMPANY
To return to DTC interface, type <Ctrl>K <L>
login:
DTC1> connect 15.13.13.13
Example of the disconnect command
DTC1>DISCONNECT 1 <return>