Using the HP DTC 16RX Manager

153
DTC user interface commands
B
Each command can be abbreviated. The commands are not case-sensitive. For
example, enter either C, c, connect, or CONNECT to connect to a system.
If you have several connections open simultaneously, when you execute one of these
commands, connection information is displayed on the screen and you are prompted
to specify the connection to which you want the command to apply.
Connect Connect opens a connection to a system.
C[ONNECT] [NODE NAME | IP address |DNS NAME]
or
C[ONNECT] [system name]
If a system is not specified, you are connected to the default destination system. If
the DNS server is not defined (see page 46), you must enter an IP address for a
Telnet system other than the default destination system.
Never include the leading zeros in an IP address when using the Connect
command. If the IP address you want to connect to is 128.10.11.12, do not type
128.010.011.012 or the connection will fail.
Disconnect Disconnect closes the system connection.
D[ISCONNECT] [ xx ]
Each connection is identified as a number (xx) in the status command display.
Only the connection number can be used. The connection name can not be used. If
the connection number is not specified, the current system connection is closed.
Help or ? Help or ? displays a list of available commands, their abbreviations, and a brief
explanation.
H[ELP]
Logout Logout logs you out of the DTC user interface. If the connection is via modems, the
line is dropped. If the connection is open on a system, it is closed.
L[OGOUT]
Recall Recall resumes a connection that you left open when you used the escape from
data transfer character to leave a connection without logging off.
R[ECALL] [ xx ]