Using the HP DTC 16RX Manager

149
Troubleshooting the DTC Manager
A
Find the status of the DTC LAN board or a port
rdtcstat dtcname
*
[dtcport]
Find the version of the software on the DTC Manager
rdtcver
Finding out if DTC uploads have occurred
rdtcupload -d
List the DTCes managed by this DTC Manager
rdtclist -d
Troubleshooting the DTC Manager
Note An asterisk indicates that the IP address of the DTC can be used instead of its name.
Format log events already retrieved from the DTC
rdtclist -e filename
Reset a DTC or a DTC port
rdtcreset dtcname
*
[dtcport]
Retrieve, format and display the DTC event log
rdtcevents dtcname
*
Test connections to a DTC
rdtcping dtcname
*
Commands that an HP Engineer might ask you to use
Only use these commands if instructed to do so by a Hewlett-Packard engineer.
Note An asterisk indicates that the IP address of the DTC can be used instead of its name.
Reprogram the EEPROM in the DTC
rdtcreprog dtcname [-v DTC_version_number]
Turning off or turning on an extended trace
rdtctraceoff dtcname
*
dtcport
rdtctraceon dtcname
*
dtcport
Uploading files from a DTC