Using the HP DTC 16RX Manager

145
Parameter definitions
22
To enable or disable the following port options, the parameter_value is set as
follows:
x or X to enable the port option
Double quotes (“ ”) to disable the port option
Script examples
To enable port 3 of mydtc1:
rdtcmodifyconfs -m -e 'enable port = "x";' mydtc1 b 3
To change the DTC user interface timeout to 30 seconds on mydtc1:
rdtcmodifyconfs -m -e 'DTC User Interface Timeout = "30";'
mydtc1 l
An example script file called dtcscript contains the following parameters:
Parameter name Explained on:
Enable Auto Speed/Parity Sensing (terminal ports only)
page 78
Enable Automatic Connection (modem ports only)
page 79
Enable Dedicated Printer (printer ports only)
page 79
Enable DTC User Interface Timeout (terminal ports only)
page 78
Enable Hardware Handshake
page 79
Enable Port
page 78
Enable Switching (terminal ports only)
page 78
Enable Keep Alive
page 79
Enable Flow Control
page 80
Enable Port Config Saved In Binary
page 80
Enable Data Buffering (host ports only)
page 80
Enable Data Buffering (host ports only)
page 80
Enable Called Port Only (terminal ports only)
page 80
Enable Eng/Ack Flow Control (for host only)
page 80