Using the HP DTC 16RX Manager

144
Parameter definitions
22
Example SNMP parameters
This example shows how two SNMP authorization filters are configured:
rdtcmodifyconfs -m -e 'SNMP Authorization Filters =
"015.123.123.111|Washington community|Read Write|DTC
MIB|015.123.123.122|Houston Community|Read Only|MIB-II";'dtc1 l
This example shows how four Trap Destination IP Addresses are configured:
rdtcmodifyconfs -m -e 'Trap Destination IP Address =
"015.123.123.111
|015.123.123.122|015.123.123.134
|015.123.123.145";' dtc1 l
Port parameters
For a DTC port, port parameters and port options for parameter_name are listed
below.
Parameter name Explained on:
Attached Device
page 83
Default Destination
page 87
Escape from Data Transfer Character
page 89
Initialization String
page 88
Line Speed
page 83
Maximum Number of Sessions
page 85
Modem Behavior
page 86
Number of Systems Sharing Printer
page 85
Wait Queue Length
page 85
Parity (Bit Parity)
page 84
Number of Stop Bits
page 84
Data Transfer Mode
page 85
Terminal IP Address
page 83
Printer IP Address
page 83
Host Name IP Address
page 83