Using the HP DTC 16RX Manager

140
Using rdtcmodifyconfs
22
Example
This example shows how to copy port 3 of dtc1 and the paste the configuration to
the same port on dtc2.
rdtcmodifyconfs -c dtc1 b 3
rdtcmodifyconfs -p dtc2 b 3
Modify parameters option
-m Used to specify which parameters to modify for given dtcobjects . The
parameters can be given on the command line or in a user-defined scriptfile. In
both cases, each parameter is specified with single quotes and the scriptfile
must be given with a full path name.
Object parameters
dtcobject The dtcobject parameter specifies a board, or port(s) to be copied, pasted, or
modified. For copying, only a single object can be specified. For pasting or
modifying, multiple similar dtcobjects can be specified.
If you specify a board, then you must specify a DTC. If you specify a port, then you
must specify a DTC and a board.
The syntax is:
dtc [board [port]]
dtc (Mandatory) The name of the target DTC to modify. This is the same DTC name
you used when you added the DTC using rdtcconf. A DTC name must be from 1
to 8 alphanumeric characters, including hyphens (-) and underscores (_). Note that
the first character must be alphabetic. An asterisk (*) is a wildcard character.
board The name or number of the target board to modify. The board parameter is one of
the following:
L or l LAN.
B or b Board.