Using the HP DTC 16RX Manager

139
Using rdtcmodifyconfs
22
Note You can only run one of the following DTC Manager commands at a time:
rdtcmodifyconfs or dtcping. For this reason only one user can configure and
modify a DTC at a time.
Refer to the rdtcmodifyconfs.sh file for a complete description of command
options.
Common uses for rdtcmodifyconfs
Command syntax
rdtcmodifyconfs [-c][-p] <dtcobject>
rdtcmodifyconfs [-m][-e <parameter_name>] <dtcobject>
rdtcmodifyconfs [-m][-f <scriptfile>] <dtcobject>
Note Use the rdtcmodifyconfs.sh script file provided with your DTC Manager file set.
Copying and pasting configurations
-c Copies the specified dtcobject into an internal copy buffer. The dtcobject is a
board or port (explained later in this chapter). Only one dtcobject may be copied.
A dtcobject can be one of the following items:
• A board—specify the DTC name and board (LAN boards cannot be copied).
• A port—specify the DTC name, the board, and the port number.
-p Pastes the dtcobject from the internal copy buffer into one or more compatible
dtcobject locations. For example, you can paste a board to another board; you can
not paste a board to a port.
Task Command Syntax
Copy a configuration rdtcmodifyconfs -c dtcobject
Paste a configuration to DTC
board(s) or port(s)
rdtcmodifyconfs -p [-q] dtcobject
Specify a script file containing
the parameters to modify
rdtcmodifyconfs -m [-f scriptfile]
[-e ‘parameter_name’] [-q] dtcobject