Using the HP DTC 16RX Manager

128

The reprogramming procedure

For systems running HP_UX 9.x, the download code is in the ﬁle:

/usr/tftpdir/rdtcmgr/code/<DTC_version_number>/romrx.cod

For systems running HP_UX 10.0, the download code is in the ﬁle:

/opt/rdtcmgr/code/romrx.cod

Caution Reprogramming the DTC takes approximately ten minutes. During this time the

status light on the DTC’s rear panel will display a ﬂashing number 6. Do not switch

the power off during this period. If there is power failure during this period the

DTC will generate a fatal error code number 6 (not ﬂashing) and will not operate.

Command examples

To reprogram dtc3 with the A1410G00 version of the software, enter:

rdtcreprog dtc3 -v A1410G00

To reprogram the EEPROM code in the DTC named dtc3 with the latest DTC

version available:

rdtcreprog dtc3