Using the HP DTC 16RX Manager

9
Manual organization
Chapter 13—Configuring a Backup DTC Manager describes how to configure a
host computer to act as a backup manager for the DTC.
Chapter 14—Configuring Connections to HP 3000 Systems describes how to
configure the DTC Manager and the DTC for connections to HP 3000 systems. It
describes the configuration of a front-end DTC to provide two-way connection
between DTC ports and an HP 3000 Series system across a routed IP network.
Chapter 15—Configuring a DTC Printer for HP 9000 Access describes how to
create a DTC device file with the DDFA utility and how to configure your DTC
printer for the HP-UX spooler.
Chapter 16—Troubleshooting describes how to solve DTC communication
problems.
Chapter 17—Diagnosing DTC Problems describes the DTC Manager commands
for resetting the DTC, reporting DTC and port status and running simple tests of the
network connections.
Chapter 18—Reprogramming a DTC describes how to reprogram the Flash
EEPROM in the DTC.
Chapter 19—Listing DTC Configurations describes how to use the rdtclist
command to list DTC configurations.
Chapter 20—Logging DTC Events describes how to retrieve and format a DTC
event log file.
Chapter 21—File Management describes how to manage DTC Manager files.
Chapter 22—Modifying configurations with rdtcmodifyconfs describes how to
modify multiple DTC configurations in one procedure.
Appendix A—DTC Manager Commands lists the commands available on the
DTC Manager.
Appendix B—DTC Terminal Parameters and Commands describes the DTC
commands that you can use at the DTC prompt when you log in at a terminal
connected to a DTC.
Appendix C—DTC Manager File System contains listings of all files and
directories used by DTC Manager.
Glossary—provides a glossary of the terms used in this manual.