User's Guide for MS-DOS Clients

34
Getting Started with LAN Manager Enhanced
Using the LAN Manager Screen
Check Boxes
With a check box, you turn an option on or off. When a check box is marked
with an X, the option is on. When the cursor is in a check box, you can use
the SPACEBAR as a toggle to select or clear the box.
To select or clear a check box with the mouse, click inside it.
Option Buttons
With an option button, you select one option from a group of options. One
option button is always selected, and you can select only one option button
at a time.
To select an option button, use the following keys:
To select an option button with the mouse, click it.
Command Buttons
A command button performs a specific LAN Manager task. To choose a
command button, press TAB to move to the button, and then press ENTER.
You can also choose a command button by pressing the key that corresponds
to the highlighted letter in the command button. When a command button
does not contain a highlighted letter, the command button is unavailable.
To choose a command button with the mouse, click it.
Getting Help from the LAN Manager Screen
There are two ways to get Help while using the LAN Manager screen: by
selecting the Help menu and by pressing F1. The Help menu provides access
to Help topics, which appear on your screen in message boxes called Help
boxes.
Key Action
↑ Changes the selection to the previous option.
↓
Changes the selection to the next option.