User's Guide for MS-DOS Clients

327
Using Remote Access Service
Installing RAS
The LOAD command accepts the following switches:
The default switches are [ubr]. Before binding, be sure the program is
already loaded; that is, use [u] or [c] before using [b]. Before registering, be
sure that the file is both loaded and bound; that is, use [u] or [c] and [b]
before using [r].
Switch Meaning
u When used in the LOAD= line, the program is loaded into
upper memory blocks on MS-DOS version 5 or 6, if
possible; otherwise the program is loaded into conventional
memory. When used in the UNLOAD= line, the program is
unloaded.
c No attempt is made to load the program into upper memory
blocks.
b Binds the protocol to the hardware device driver.
r Registers the protocol with the LAN Manager redirector.
d Deregisters the protocol from the LAN Manager redirector.