User's Guide for MS-DOS Clients

198

Enhanced Reference

Command and Utility Summary

Unload

Purpose

The unload utility unloads a speciﬁed protocol from a workstation with

Demand Protocol Architecture (DPA).

Syntax

unload protocol

where

protocol

Is the name of the last protocol loaded. Information regarding protocols is placed

in the PROTOCOL.INI file and in the LANMAN.DOS\DRIVERS\PROTOCOL

directory by the installation program. You should not edit these files.

Comments

Protocols must be unloaded in the reverse of the order in which they were

loaded (last in is ﬁrst out). To get information about what protocols are

loaded, and in what order, type:

load /i

Do not use the unload utility while running the Microsoft Windows

operating system. Either unload the protocol before running the Windows

operating system, or stop the Windows operating system, unload the

protocol, and then restart the Windows operating system.