Transport Optional Upgrade Release (TOUR) 2.4 Release Notes

Installing TOUR 2.4

This section includes information on obtaining and installing TOUR 2.4. It also includes

information required before and after the TOUR 2.4 installation.

NOTE TOUR 2.4 is not compatible with some versions of IPSec. Before installing

TOUR 2.4, see “Compatibility Between TOUR 2.4 and IPSec” on page 12.

Installation Instructions

To install TOUR 2.4, complete the following steps:

Step 1. Review “System Requirements” on page 7 to ensure your system meets TOUR 2.4

requirements.

Step 2. To download TOUR 2.4, complete the following steps:

a. Go to the HP Software Depot at http://www.hp.com/go/softwaredepot.

b. Search for “Transport Optional Upgrade Release” and read the “Overview” and

“Installation” pages for TOUR 2.4.

c. Select the Receive for Free >> option at the bottom right corner of the

“Overview” or “Installation” Web page.

You can observe that the product name and version is TOUR 2.4, and the

software specification is HP-UX 11i v1 (B.11.11).

d. Enter your registration information, and read and accept the Terms and

Conditions statements.

e. Select Download at the bottom of the page and save the TOUR 2.4 release

depot to a local file on your system. For example: /tmp/TOUR.depot.

f. Use the swlist -d @ /tmp/TOUR.depot command to verify the depot file is on

your system.

Step 3. Use swinstall to install TOUR 2.4 from the location where you saved the depot

file. For example, run the following command:

swinstall -x autoreboot=true -s /tmp/TOUR.depot TOUR