Transport Optional Upgrade Release (TOUR) 2.2 Release Notes

Transport Optional Upgrade Release (TOUR) 2.2 Release Notes
Installing TOUR 2.2
10
Additional Information
This section includes other relevant information about installing and using TOUR 2.2.
Installation or Removal of Transport or PPP Patches
After installing TOUR 2.2, you cannot remove or install additional transport patches. If you
need to add or remove a transport patch, then you will need to first remove TOUR 2.2.
Separate patches for TOUR 2.2 (distinct from transport patches) will be available, as needed.
If you attempt to install a transport patch after installing TOUR 2.2, the system displays the
following message:
NOTE: The Transport Optional Upgrade Release (TOUR) is already installed.
HP-UX cumulative ARPA Transport patches can NOT be installed because
installing them would corrupt TOUR. TOUR has a separate support mechanism
(patches and new versions). Please use this for updates to TOUR. If you must
install this patch PHNE_
nnnnn
, then first remove TOUR.
If you attempt to remove a transport patch after installing TOUR 2.2, the system displays the
following message:
ERROR: The Transport Optional Upgrade Release (TOUR) is already installed.
HP-UX cumulative ARPA Transport patches can NOT be removed because removing
them would corrupt TOUR. If you must remove this patch PHNE_
nnnnn
, then first
remove TOUR.
If you attempt to install or remove a PPP patch, similar messages are displayed.
TOUR 2.2 and IPSec
TOUR 2.2 is only compatible with IPSec (J4256AA) version A.02.00 or greater. TOUR 2.0 (or
later) is actually a software requirement for IPSec (J4256AA) version A.02.00 or greater.
TOUR 2.2 and 2.0 are not compatible with earlier versions of IPSec. If you try to install TOUR
2.2 on a system that has an earlier version of IPSec (J4256AA) you will see the following error
message:
ERROR: An older IPSec product (J2456AA) is already installed. This version
of Transport Optional Upgrade Release (TOUR) can only be installed if either
1) the older IPSec has been removed, or 2)when available, IPSec (J4256AA)
version A.02.00 or greater is installed at the same time. IMPORTANT: DO NOT
REMOVE IPSec unless a) you no longer want IPSec and need this version of TOUR
or b) you are sure you can obtain IPSec (J4256AA) version A.02.00 or greater.
A similar message is displayed if you have the older IPSec56 product (J4255AA).