Supervising the Network

2-36
Setting Up and Managing NetWare Directory Services Objects
Managing Groups of User Objects
8 Repeat Step 5 through Step 7 to add more User objects to the Group object.
9 When you have finished adding User objects to the Group object, choose “OK”
to save your changes and return to the browser.
Adding Members to a Group Object Using NETADMIN
Prerequisites
• A workstation running DOS 3.30 and NETADMIN
• The Supervisor right to the Group object, or the Write or Supervisor right to the
Members property of the Group object
• The Supervisor right to the Group object, or the Write or Supervisor right to the
Security Equal To property of the User object
• The Supervisor or Write right to the ACL property of the Group and User objects
• The Group object must already exist, and the User objects you want to add as
members of the Group must already exist
Procedure
1 At the DOS prompt, type
NETADMIN <Enter>
For information on moving around in NETADMIN and selecting objects, press
<F1> after starting the utility.
2 From the “NetAdmin options” menu, choose “Manage objects.”
3 Browse the Directory until the Group object appears on the screen.
Use the instructions at the bottom of the screen to browse the directory. Press
<F1> for help.
4 When the Group object appears in the “Object” list, select it and press <F10>.
The “Actions” menu appears.
5 Choose “View or Edit Properties of This Object.”
6 From the “View or Edit Group” menu, choose “Group Members.”
7 At the “Group Members” screen, press <Insert> and then press <Insert> again to
browse for the User object you want to add to the Group object.
8 When the User object you want to add appears in the Directory, select it and press
<F10>.